Serge Paperface -
Anniversary Edition

"Designing the first generation of Serge modules in '72-'73 was a stab in the dark. Today, the redesign of these modules is like opening a door to a new universe. VCOs that track. Dual programmers featuring built-in sequencing and a metronomic clock. Silver on enamel panels, yet keeping to the spirit and patch-programmability of the original paperface panels. Glad to announce the first of several 50th anniversary Serge panels !"

Serge Tcherepnin

Serge Paperface panel

Introducing the redesign of Serge's legendary paper face modular series from 1972/1973. Keeping the original circuits while adding some refinements and improvements - designed by Serge himself, 50 years after he started. Like temperature-compensated 1V/Octave inputs on the VCOs. Pulse width modulation. A new metronomic clock. Balanced output.

 

SERGE HELIOS - Voice panel

Serge Sequencer panel

The Serge HELIOS is a powerful voice panel that brings the raw Paperface oscillator sound to a new level and is the ideal basis for both tonal and experimental sound explorations. Serge's redesign of the 1973 VCOs adds temperature compensation and exceptional tracking over 6+ octaves. The Oscillator+ adds an PULSE OUT with pulse width modulation.

The voice panel comes built and calibrated in a superslim boat and is designed to be powered externally (e.g. with a mobile PSU) - PSU not included.

SERGE HELIOS (including boat) - CAN BE ORDERED NOW! - 17" 2100 *
* plus VAT where applicable

PLEASE CONTACT US TO ORDER - THANKS!

HELIOS Modules

Serge OSCILLATOR (2") 
Serge OSCILLATOR+ (3") 
Serge SMOOTH & STEPPED Generator (SSG) (3") 
Serge DUAL CV-PRO (3") 
Serge TRIPLE WAVESHAPER (TWS) (3") 
Serge 1973VCF, Balanced OUT (2") 

Serge TEMPO DI ROMA - Sequencer panel

Serge Sequencer panel

TEMPO DI ROMA offers a unique combination of sequencing, programming, switching and logic, that brings Paperface to a new level. The classic GATE sequencer is no longer alone - two 4-step programmers that are also sequencers (with HOLD, RESET, UP/DOWN) can be run independently. Serge's new metronomic Clock is a precise, temperature-stable analog tempo source that can bring any of these sequencers to life. Three Bi-Directional Switches allow complex combinations of the Sequencers (or even audio signals). The bottom switch is special: it includes a Flip-Flop so that with the first trigger, the Switch is turned ON (and stays ON), until another trigger turns it OFF again. An additional FLOP output is also added. Last not least the panel contains a PEAK&TROUGH section. With logic signals, PEAK (max function) acts like an boolean OR, TROUGH (min function) like a boolean AND. However, PEAK&TROUGH can also be used with audio signals or CV.

The sequencer panel comes built and calibrated in a superslim boat and is designed to be powered externally (e.g. with a mobile PSU) - PSU not included.

SERGE TEMPO DI ROMA (including boat) - CAN BE ORDERED NOW! - 17" 2100 *
* plus VAT where applicable

PLEASE CONTACT US TO ORDER - THANKS!

TEMPO DI ROMA Modules

Serge Gate Sequencer (2") 
Serge Sequencer / Programmer with Metronomic Clock (6") 
Serge Bidirectional Switches (2") 
Serge Sequencer / Programmer with Peak & Trough (6") 

SERGE PARIS-FLASH - Slopes panel

Serge Paris-FLASH panel

The Serge PARIS-FLASH combines the key Serge modules of the Paperface era, especially slopes and envelopes, into one panel. While it may look like a system primarily designed for CV-Control, it is equally strong in the audio range.

PARIS-FLASH is based on the original Serge circuitry, however Serge has newly added some exciting new ideas as well as various circuit imoprovements for the anniversary edition. So is the Dual Gates a completely new design that goes far beyond simple VCA tasks.

The slopes panel is to be released in FALL 2023 and will come built and calibrated in a superslim boat and is designed to be powered externally (e.g. with a mobile PSU) - PSU not included.

Serge Paperface panel Serge Paperface 50 Serge Paperface panel Serge Paperface 50

Power Supply

A mobile PSU to power 2 or 3 Paperface panels is available here.


Random*Source on InstagramRandom*Source on YoutubeRandom*Source on Facebook