Serge TWS for Euro
Serge Triple Waveshaper for Euro TWS kit contents

Serge Triple+ Waveshaper (TWS+)

The TRIPLE WAVESHAPER (TWS) is a non-linear modifier which can transform a sawtooth wave into a sine wave. This classic module incorporates three independent waveshapers for modifying synthesizer waveforms or for processing signals from preamplified instruments. Although originally designed as a waveshaper for early Serge oscillators, this module has been found to be a excellent modifier of electronic and acoustic sounds, and is highly recommended for subtle timbral modifications beyond the range of simple oscillator/filter patches.

The R*S version extends the classic TWS concept:

  • +1: An additional (4th) waveshaper has been added (right after the first / bottom waveshaper) that can be dialed in smoothly using the +1 knob. Turned down (CCW) the bottom section acts as in the original (as if that additional waveshaper would not exist). Turned up (CW) the bottom section is actually 2 waveshapers in series.
  • Switches to link the 3 sections - bottom to top. Using these switches all sections can be set to act in series, starting at the bottom and ending at the top, providing the combined effect of 3 to 4 waveshapers (or anything in between) using the +1 knob.
  • Linking only the middle and top section and turning the +1 knob up (to have 2 sections in the bottom) allows you to use the module for isntance as two independent 2-stage waveshapers (using bottom in and out for one and middle in and top out for the other) - e.g. for stereo processing.

The Random*Source version is a licensed and authorized adaption of the original Serge design.

Build documentation: Serge TWS+ euro BOM / Build doc

Some details of the Random*Source Serge TWS kit:

  • Under licence from and in cooperation with Serge Tcherepnin
  • 4th waveshaper can be gradually added
  • perfect companion for a dsg mk2
  • pcb in SMT, manufactured in Germany
  • No wiring needed
  • Eurorack format (3U), 18 hp
  • Power consumption: 20mA @ +12V, 10mA @ -12V
  • Module depth: < 30mm

The Random*Source TWS euro kit contains:

  • Color printed front panel, 2mm, cnc made in germany
  • 1 Serge TWS euro pcb (SMT, all SMT components mounted)

*** THE DIY SET IS NOT A FULL KIT !! ***

Complete Module    310 EUR

Back to Serge Eurorack Module overview
Random*Source on InstagramRandom*Source on YoutubeRandom*Source on Facebook